Spring Replacement is made simple.
You need to shut the door and carry out the replacement from inside during Spring Replacement South Gate. Next you need to power off the door to avoid electrocution. For newer versions of doors you need to completely disconnect the opener from the door. For older versions of doors you need to power off the circuit breaker or remove the fuse.
Make sure that the size of the spring you are about to replace is the same as the one you bought. The size of the springs cannot be bigger or smaller. Avoid picking them avid grabbing them by the spring. Grabbing the spring could cause snapping and it could cause injuries. Also make sure that you do not touch the winding cones on the new spring. Mark the torsion shaft ends. This will help you see if you have a level balanced door once you are done.
The next thing you need to do is wind the spring that is not broken and unfasten the bolts securing the torsion cones and spring bracket together, and then remove the bolts. Now replace the spring and the hardware that you had removed during Spring Replacement South Gate. But, how do I change a torsion spring by myself? It is a rather simple procedure though it shouldn’t be taken with ease because the risks of accident are elevated and safety should be the most important thing when you decide to do this job. You should always consult with professional help or you tube videos to make sure you completely understand the procedure you have to do and you avoid an accident during the job.